Big Stripes.

Small Stripes.

We Can Remove Them All.

Pavement Marking Removal Services

Our pavement marking removal processes are designed to eradicate outdated lines and symbols with minimal surface damage and maximum environmental responsibility.

PAVEMENT MARKING OBLITERATION

Obliterating existing pavement markings requires methods that balance removal effectiveness with surface preservation and environmental compliance. 


At All Ontario Striping, we provide pavement marking obliteration services across Southern Ontario, the Greater Toronto Area (GTA), Toronto Metropolia, and surrounding municipalities. From municipal roadway realignments to large-scale airport projects, our crews operate throughout the region with the capacity to handle both urban and rural environments.

OUR Methods of removal

Ultra-High-Pressure (UHP) Water Blasting

  • Equipment operates at pressures up to 40,000 PSI with controlled flow rates.
  • Integrated vacuum recovery system collects all water and debris immediately at the point of impact.
  • Removed material and water are transferred into an onboard recovery tank, leaving the pavement clean and free of residue.
  • Because the surface is flushed and vacuumed simultaneously, there is no secondary debris left behind, making this method especially suitable for runways, high-traffic highways, and municipal arterial roads.
  • The process does not alter the macrotexture or microtexture of the pavement, preserving skid resistance and structural integrity.

Dustless grinding

  • We operate Graco self-propelled grinder units, the latest heavy-duty models designed for pavement marking obliteration.
  • Grinder heads are precision-engineered to mill markings efficiently while minimizing surface damage.
  • Each grinder is paired with industrial-grade vacuum systems featuring multi-stage dust separation and HEPA filtration, ensuring capture of fine particulates and compliance with Ontario Ministry of Labour silica exposure regulations.
  • Suitable for parking lots, municipal streets, and warehouse floors where cost-effectiveness and dust control are critical.

abrasive blasting

  • Utilizes still shots and glass beads as a blasting medium.
  • Non-abrasive process lifts paint and coatings without damaging underlying substrates.
  • Generates minimal heat and virtually no secondary dust cloud, making it suitable for delicate surfaces.

TECHNICAL ADVANTAGES

  • Surface Integrity – UHP water and soda methods eliminate markings without scarring or pitting
  • Air Quality Compliance – Dustless grinding with HEPA filters meets OHSA silica dust standards
  • Environmental Protection – Water and soda blasting eliminate the need for silica-based abrasives
  • Material Versatility – Effective on asphalt, concrete, epoxy coatings, and polymer overlays
  • Immediate Re-marking Capability – Surfaces are left bond-ready for new line application

Call us for a Free Estimate: 437-973-2292

STANDARD Process

  1. Assessment – Identify marking type, substrate, and traffic conditions
  2. Method Selection – Choose UHP, grinding, or soda blasting based on project specs (e.g., MTO OPS, FAA AC 150/5370-10H)
  3. Execution – Use calibrated equipment with controlled removal parameters
  4. Containment & Recovery – Water, debris, and dust fully captured in recovery tanks or filtered vacuum systems
  5. Surface Verification – Inspect to confirm removal depth and readiness for re-striping or sealing

APPLICATIONS

  • Municipal Roads & Highways – lane realignments, decommissioned crosswalks, temporary detours
  • Airports – runway/taxiway marking removal under Transport Canada and FAA guidelines
  • Parking Facilities – layout modifications for accessibility or EV charging infrastructure
  • Industrial & Warehouse Facilities – safety line reconfiguration without disrupting operations

COMPLIANCES & REFERENCES

  • Ministry of Transportation Ontario (MTO) OPS Standards
  • Ontario OHSA – Silica Control Regulations
  • Transport Canada TP312E – Aerodrome Standards
  • FAA AC 150/5370-10H – Item P-620 Pavement Marking

Why AOS is the preferred Pavement Marking Removal Company in the GTA:

  • Quick turnaround: Outdated or incorrect pavement markings?

• On-site assessment (usually within 24 hours of request)

• Removal and re-striping (if needed) begins shortly after


  • Specialized removal methods: Experienced in all pavement marking removal techniques.

• Water blasting, Dustless Grinding, Soda Blasting

• Safe surface preparation for new line markings


  • Protect your property: Proper removal prevents driver confusion, safety hazards, and premature surface wear.

• Smooth, clean finish without damaging asphalt or concrete

• Ready for re-striping or sealcoating


  • Trusted across Toronto & the GTA

• Serving commercial lots, roadways, and industrial sites

• Consistently chosen by property managers, contractors, and municipalities


  • Easy scheduling: Call 437-973-2292 for fast service.

• Prompt response and flexible project timing

• Work completed on budget, on time, and to spec


  • Professional crew & equipment

• Trained technicians using state-of-the-art removal equipment

• Environmentally responsible removal processes

• Strict safety standards on every project


  • Cost-effective surface preparation

• Extends pavement life by avoiding improper line coverage

• Prevents costly rework and liability issues

• Provides a clean base for long-lasting pavement markings